Part Number Hot Search : 
TGL8784 10CD2 TA1217 LD242 SL900 R9G23012 SR203 TSOP1137
Product Description
Full Text Search
 

To Download BTA204X-600D Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
  1. product profile 1.1 general description passivated guaranteed commutation triacs in a plastic full pack package. these devices balance the requirements of commutation perfo rmance and gate sensit ivity. the ?sensitive gate? e series and ?logic level? d series are in tended for interfacing with low power drivers, including microcontrollers. 1.2 features and benefits 1.3 applications 1.4 quick reference data 2. pinning information bta204x series d, e and f three quadrant triacs guaranteed commutation rev. 5 ? 3 november 2011 product data sheet to- 220f ? suitable for interf acing with low power drivers, including microcontrollers ? isolated mounting base ? motor control ? high inductive loads ? v drm ? 600 v (BTA204X-600D) ? i t(rms) ? 4 a ? v drm ? 600 v (bta204x-600e) ? i gt ? 5 ma (BTA204X-600D) ? v drm ? 600 v (bta204x-600f) ? i gt ? 10 ma (bta204x-600e) ? v drm ? 800 v (bta204x-800e) ? i gt ? 25 ma (bta204x-600f) table 1. pinning pin description simplified outline symbol 1 main terminal 1 (t1) sot186a (to-220f) 2 main terminal 2 (t2) 3 gate (g) mb mounting base (isolated) 321 mb sym051 t1 g t2
bta204x_ser_d_e_f all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2011. all rights reserved . product data sheet rev. 5 ? 3 november 2011 2 of 13 nxp semiconductors bta204x series d, e and f three quadrant triacs guaranteed commutation 3. ordering information 4. limiting values [1] although not recommended, off-state voltages up to 800 v may be applied without damage, but the triac may switch to the on-state. the rate of rise of current should not exceed 6 a/ ? s. table 2. ordering information type number package name description version BTA204X-600D to-220f plastic single-ended package; isolated heatsink mounted; 1 mounting hole; 3 lead to-220 ?full pack? sot186a bta204x-600e bta204x-600f bta204x-800e table 3. limiting values in accordance with the absolute ma ximum rating system (iec 60134). symbol parameter conditions min max unit v drm repetitive peak off-state voltage BTA204X-600D [1] -600v bta204x-600e [1] -600v bta204x-600f [1] -600v bta204x-800e - 800 v i t(rms) rms on-state current full sine wave; t hs ? 92 ? c; figure 4 and figure 5 -4a i tsm non-repetitive peak on-state current full sine wave; t j =25 ? c prior to surge; figure 2 and figure 3 t = 20 ms - 25 a t = 16.7 ms - 27 a i 2 ti 2 t for fusing t = 10 ms - 3.1 a 2 s dl t /dt repetitive rate of rise of on-state current after triggering i tm =6a; i g =0.2a; di g /dt = 0.2 a/ ? s -100a/ ? s i gm peak gate current - 2 a p gm peak gate power - 5 w p g(av) average gate power over any 20 ms period - 0.5 w t stg storage temperature ? 40 +150 ?c t j junction temperature - 125 ?c
bta204x_ser_d_e_f all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2011. all rights reserved . product data sheet rev. 5 ? 3 november 2011 3 of 13 nxp semiconductors bta204x series d, e and f three quadrant triacs guaranteed commutation ? = conduction angle fig 1. total power dissipation as a function of rms on-state current; maximum values f=50hz fig 2. non-repetitive peak on-state current as a function of the number of sinusoidal current cycles; maximum values 001aac329 4 2 6 8 p tot (w) 0 103 114 92 81 t hs(max) (c) 125 i t(rms) (a) 0 5 4 23 1 = 180 120 90 60 30 001aac331 10 20 30 i tsm (a) 0 n 1 10 3 10 2 10 i tsm t i t t j(init) = 25 c max t
bta204x_ser_d_e_f all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2011. all rights reserved . product data sheet rev. 5 ? 3 november 2011 4 of 13 nxp semiconductors bta204x series d, e and f three quadrant triacs guaranteed commutation t p ? 20 ms (1) di t /dt limit (2) t2 ? g+ quadrant fig 3. non-repetitive peak on-state current as a function of pulse width; maximum values f=50hz; t h ? 92 ? c fig 4. rms on-state current as a function of surge duration; maximum values fig 5. rms on-state current as a function of heatsink temperature; maximum values 001aac330 t (s) 10 ?5 10 ?1 10 ?2 10 ?4 10 ?3 10 2 10 3 i tsm (a) 10 (1) (2) i tsm t i t t j(init) = 25 c max t 001aac333 4 8 12 i t(rms) (a) 0 surge duration (s) 10 ?2 10 1 10 ?1 001aac332 t hs (c) ?50 150 100 50 0 2 1 3 5 4 i t(rms) (a) 0 92 c
bta204x_ser_d_e_f all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2011. all rights reserved . product data sheet rev. 5 ? 3 november 2011 5 of 13 nxp semiconductors bta204x series d, e and f three quadrant triacs guaranteed commutation 5. thermal characteristics 6. isolation characteristics table 4. thermal characteristics symbol parameter conditions min typ max unit r th(j-hs) thermal resistance from junction to heatsink full or half cycle with heatsink compound; figure 6 --5.5k/w full or half cycle without heatsink compound; figure 6 --7.2k/w r th(j-a) thermal resistance from junction to ambient in free air - 55 - k/w (1) unidirectional without heatsink compound (2) unidirectional with heatsink compound (3) bidirectional without heatsink compound (4) bidirectional with heatsink compound fig 6. transient thermal impedance as a function of pulse width 001aac339 t p (s) 10 ?5 11 0 10 ?1 10 ?2 10 ?4 10 ?3 1 10 ?1 10 z th(j-hs) (k/w) 10 ?2 t p p d t (1) (2) (4) (3) table 5. isolation limiting values and characteristics t hs = 25 ? c unless otherwise specified. symbol parameter conditions min typ max unit v isol rms isolation voltage from all three terminals to external heatsink f = 50 hz to 60 hz; sinusoidal waveform; r.h. ? 65 %; clean and dust free - - 2500 v c isol capacitance from pin 2 to external heatsink f=1mhz - 10 - pf
bta204x_ser_d_e_f all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2011. all rights reserved . product data sheet rev. 5 ? 3 november 2011 6 of 13 nxp semiconductors bta204x series d, e and f three quadrant triacs guaranteed commutation 7. static characteristics table 6. static characteristics t j =25 ? c unless otherwise specified. symbol parameter conditions BTA204X-600D bta204x-600e bta204x-600f unit min typ max min typ max min typ max i gt gate trigger current v d =12v; i t =0.1a; figure 8 t2+ g+ - - 5 - -10- -25ma t2+ g ? - - 5 - -10- -25ma t2 ? g ? - - 5 - -10- -25ma i l latching current v d =12v; i gt =0.1a; figure 10 t2+ g+ - - 6 - -12- -20ma t2+ g ? - - 9 - -18- -30ma t2 ? g ? - - 6 - -12- -20ma i h holding current v d =12v; i gt =0.1a; figure 11 - - 6 - -12- -20ma v t on-state voltage i t =5a; figure 9 - 1.4 1.7 - 1.4 1.7 - 1.4 1.7 v v gt gate trigger voltage v d =12v; i t =0.1a; figure 7 - 0.7 1.5 - 0.7 1.5 - 0.7 1.5 v v d = 400 v; i t =0.1a; t j =125 ?c 0.25 0.4 - 0.25 0.4 - 0.25 0.4 - v i d off-state leakage current v d =v drm(max) ; t j =125 ?c - 0.1 0.5 - 0.1 0.5 - 0.1 0.5 ma
bta204x_ser_d_e_f all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2011. all rights reserved . product data sheet rev. 5 ? 3 november 2011 7 of 13 nxp semiconductors bta204x series d, e and f three quadrant triacs guaranteed commutation 8. dynamic characteristics table 7. dynamic characteristics symbol parameter conditions BTA204X-600D bta204x-600e bta204x-600f unit min typ max min typ max min typ max dv d /dt critical rate of rise of off-state voltage v dm =67% v drm(max) ; t j =125 ?c; exponential waveform; gate open circuit 20--30--50--v/ ? s di com /dt critical rate of change of commutating current v dm = 400 v; t j =125 ?c; i t(rms) = 4 a; dv com /dt = 10 v/ ? s; gate open circuit 1.1 - - 2.1 - - 3 - - a/ ? s v dm = 400 v; t j =125 ?c; i t(rms) = 4 a; dv com /dt = 0.1 v/ ? s; gate open circuit 4.5--8--15--a/ ? s t gt gate controlled turn-on time i tm =20a; v d =v drm(max) ; i g =0.1a; di g /dt = 5 a/ ? s -2- -2- -2- ? s (1) t2 ? g ? (2) t2+ g ? (3) t2+ g+ fig 7. normalized gate trigger voltage as a function of junction temperature fig 8. normalized gate trigger current as a function of junction temperature t j (c) ?50 150 100 50 0 001aac334 0.8 1.2 1.6 v gt 0.4 v gt (25c) t j (c) ?50 150 100 50 0 001aac335 1 2 3 i gt (t j ) 0 (1) (2) (3) i gt (25c)
bta204x_ser_d_e_f all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2011. all rights reserved . product data sheet rev. 5 ? 3 november 2011 8 of 13 nxp semiconductors bta204x series d, e and f three quadrant triacs guaranteed commutation 9. package information refer to mounting instructions for f- pack packages. epoxy meets ul94 v-0 at 1 8 inch. v o =1.27v r s = 0.091 ? (1) t j = 125 ? c; typical values (2) t j =25 ? c; maximum values (3) t j = 125 ? c; maximum values fig 9. on-state current as a function of on-state voltage fig 10. normalized latching current as a function of junction temperature fig 11. normalized holding current as a function of junction temperature v t (v) 03 2 1 001aac338 4 8 12 i t (a) 0 (2) (3) (1) t j (c) ?50 150 100 50 0 001aac336 1 2 3 i l 0 i l (25c) t j (c) ?50 150 100 50 0 001aac337 1 2 3 i h 0 i h (25c)
bta204x_ser_d_e_f all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2011. all rights reserved . product data sheet rev. 5 ? 3 november 2011 9 of 13 nxp semiconductors bta204x series d, e and f three quadrant triacs guaranteed commutation 10. package outline fig 12. package outline sot186a (to-220f) references outline version european projection issue date iec jedec jeita sot186a 3-lead to-220f 0 5 10 mm scale plastic single-ended package; isolated heatsink mounted; 1 mounting hole; 3-lead to-220 'full pack' sot186a a a 1 q c k j notes 1. terminal dimensions within this zone are uncontrolled. 2. both recesses are ? 2.5 0.8 max. depth d d 1 l l 2 l 1 b 1 b 2 e 1 e b w m 1 23 q e p t unit d b 1 d 1 e qqp l c l 2 (1) max. e 1 a 5.08 3 mm 4.6 4.0 a 1 2.9 2.5 b 0.9 0.7 1.1 0.9 b 2 1.4 1.0 0.7 0.4 15.8 15.2 6.5 6.3 e 10.3 9.7 2.54 14.4 13.5 t (2) 2.5 0.4 l 1 3.30 2.79 j 2.7 1.7 k 0.6 0.4 2.6 2.3 3.0 2.6 w 3.2 3.0 dimensions (mm are the original dimensions) 02-04-09 06-02-14 mounting base
bta204x_ser_d_e_f all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2011. all rights reserved . product data sheet rev. 5 ? 3 november 2011 10 of 13 nxp semiconductors bta204x series d, e and f three quadrant triacs guaranteed commutation 11. revision history table 8. revision history document id release date data sheet status change notice supersedes bta204x_ser_d_e_f v.5 20111103 product data sheet - bta204x_ser_d_e_f v.4 modifications: ? the format of this data sheet has been redesigned to comply with the new identity guidelines of nxp semiconductors. ? legal texts have been adapted to the new company name where appropriate. bta204x_ser_d_e_f v.4 20050317 product data sheet - bta204x_series_d_e_f v.3 bta204x_series_d_e_f v.3 20030501 product specification - bta204x_series_d_e_f v.2 bta204x_series_d_e_f v.2 19981201 product specification - bta204x_series_d_e_f v.1 bta204x_series_d_e_f v.1 19971001 product specification - -
bta204x_ser_d_e_f all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2011. all rights reserved . product data sheet rev. 5 ? 3 november 2011 11 of 13 nxp semiconductors bta204x series d, e and f three quadrant triacs guaranteed commutation 12. legal information 12.1 data sheet status [1] please consult the most recently issued document before initiating or completing a design. [2] the term ?short data sheet? is explained in section ?definitions?. [3] the product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple device s. the latest product status information is available on the internet at url http://www.nxp.com . 12.2 definitions draft ? the document is a draft versi on only. the content is still under internal review and subject to formal approval, which may result in modifications or additions. nxp semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall hav e no liability for the consequences of use of such information. short data sheet ? a short data sheet is an extract from a full data sheet with the same product type number(s) and title. a short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. for detailed and full information see the relevant full data sheet, which is available on request vi a the local nxp semiconductors sales office. in case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. product specification ? the information and data provided in a product data sheet shall define the specification of the product as agreed between nxp semiconductors and its customer , unless nxp semiconductors and customer have explicitly agreed otherwis e in writing. in no event however, shall an agreement be valid in which the nxp semiconductors product is deemed to offer functions and qualities beyond those described in the product data sheet. 12.3 disclaimers limited warranty and liability ? information in this document is believed to be accurate and reliable. however, nxp semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. in no event shall nxp semiconductors be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. notwithstanding any damages that customer might incur for any reason whatsoever, nxp semiconductors? aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the terms and conditions of commercial sale of nxp semiconductors. right to make changes ? nxp semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. this document supersedes and replaces all information supplied prior to the publication hereof. suitability for use ? nxp semiconductors products are not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or malfunction of an nxp semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. nxp semiconductors accepts no liability for inclusion and/or use of nxp semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer?s own risk. applications ? applications that are described herein for any of these products are for illustrative purpos es only. nxp semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. customers are responsible for the design and operation of their applications and products using nxp semiconductors products, and nxp semiconductors accepts no liability for any assistance with applications or customer product design. it is customer?s sole responsibility to determine whether the nxp semiconductors product is suitable and fit for the customer?s applications and products planned, as well as fo r the planned application and use of customer?s third party customer(s). customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. nxp semiconductors does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer?s applications or products, or the application or use by customer?s third party customer(s). customer is responsible for doing all necessary testing for the customer?s applic ations and products using nxp semiconductors products in order to av oid a default of the applications and the products or of the application or use by customer?s third party customer(s). nxp does not accept any liability in this respect. limiting values ? stress above one or more limiting values (as defined in the absolute maximum ratings system of iec 60134) will cause permanent damage to the device. limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the recommended operating conditions section (if present) or the characteristics sections of this document is not warranted. constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. terms and conditions of commercial sale ? nxp semiconductors products are sold subject to the gener al terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms , unless otherwise agreed in a valid written individual agreement. in case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. nxp semiconductors hereby expressly objects to applying the customer?s general terms and conditions with regard to the purchase of nxp semiconducto rs products by customer. no offer to sell or license ? nothing in this document may be interpreted or construed as an offer to sell products t hat is open for acceptance or the grant, conveyance or implication of any lic ense under any copyrights, patents or other industrial or intellectual property rights. export control ? this document as well as the item(s) described herein may be subject to export control regulations. export might require a prior authorization from competent authorities. document status [1] [2] product status [3] definition objective [short] data sheet development this document contains data from the objecti ve specification for product development. preliminary [short] data sheet qualification this document contains data from the preliminary specification. product [short] data sheet production this document contains the product specification.
bta204x_ser_d_e_f all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2011. all rights reserved . product data sheet rev. 5 ? 3 november 2011 12 of 13 nxp semiconductors bta204x series d, e and f three quadrant triacs guaranteed commutation quick reference data ? the quick reference data is an extract of the product data given in the limiting values and characteristics sections of this document, and as such is not comple te, exhaustive or legally binding. non-automotive qualified products ? unless this data sheet expressly states that this specific nxp semicon ductors product is automotive qualified, the product is not suitable for automotive use. it is neither qualified nor tested in accordance with automotive testing or application requirements. nxp semiconductors accepts no liabili ty for inclusion and/or use of non-automotive qualified products in automotive equipment or applications. in the event that customer uses t he product for design-in and use in automotive applications to automotive specifications and standards, customer (a) shall use the product without nxp semiconductors? warranty of the product for such automotive applicat ions, use and specifications, and (b) whenever customer uses the product for automotive applications beyond nxp semiconductors? specifications such use shall be solely at customer?s own risk, and (c) customer fully indemnifies nxp semiconductors for any liability, damages or failed product claims resulting from customer design and use of the product for automotive app lications beyond nxp semiconductors? standard warranty and nxp semiconduct ors? product specifications. 12.4 trademarks notice: all referenced brands, produc t names, service names and trademarks are the property of their respective owners. 13. contact information for more information, please visit: http://www.nxp.com for sales office addresses, please send an email to: salesaddresses@nxp.com
nxp semiconductors bta204x series d, e and f three quadrant triacs guaranteed commutation ? nxp b.v. 2011. all rights reserved. for more information, please visit: http://www.nxp.com for sales office addresses, please se nd an email to: salesaddresses@nxp.com date of release: 3 november 2011 document identifier: bta204x_ser_d_e_f please be aware that important notices concerning this document and the product(s) described herein, have been included in section ?legal information?. 14. contents 1 product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1 general description . . . . . . . . . . . . . . . . . . . . . 1 1.2 features and benefits . . . . . . . . . . . . . . . . . . . . 1 1.3 applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.4 quick reference data . . . . . . . . . . . . . . . . . . . . 1 2 pinning information . . . . . . . . . . . . . . . . . . . . . . 1 3 ordering information . . . . . . . . . . . . . . . . . . . . . 2 4 limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2 5 thermal characteristics . . . . . . . . . . . . . . . . . . 5 6 isolation characteristics . . . . . . . . . . . . . . . . . . 5 7 static characteristics. . . . . . . . . . . . . . . . . . . . . 6 8 dynamic characteristics . . . . . . . . . . . . . . . . . . 7 9 package information . . . . . . . . . . . . . . . . . . . . . 8 10 package outline . . . . . . . . . . . . . . . . . . . . . . . . . 9 11 revision history . . . . . . . . . . . . . . . . . . . . . . . . 10 12 legal information. . . . . . . . . . . . . . . . . . . . . . . 11 12.1 data sheet status . . . . . . . . . . . . . . . . . . . . . . 11 12.2 definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 12.3 disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 12.4 trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 12 13 contact information. . . . . . . . . . . . . . . . . . . . . 12 14 contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13


▲Up To Search▲   

 
Price & Availability of BTA204X-600D

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X